2024

• PublishedLaser Incising - A Philosophical Shift: From Timber Treatment to Wood Modification
  Spear, M., Mason, P., Williams, G. & Ormondroyd, G., 15 Apr 2024, p. 162. 1 p.
  Research output: Contribution to conference › Poster
• PublishedThe chamical interactions between phenolic resin and wood studied by liquid-state NMR spectroscopy
  Kupfernagel, C., Yelle, D., Spear, M., Pitman, A. & Ormondroyd, G., 15 Apr 2024, p. 104-105. 2 p.
  Research output: Contribution to conference › Paper
• E-pub ahead of printVolatile organic compound (VOC) emissions from no-added-formaldehyde lignosulphonate/pMDI particleboards and their effect on indoor air quality
  Goncalves, S., Curling, S., Ormondroyd, G., Paiva, N., Martins, J., Magalhaes, F. & Carvalho, L., 18 Sept 2024, (E-pub ahead of print) In: Wood Material Science and Engineering. p. 1-9 9 p.
  Research output: Contribution to journal › Article › peer-review

2023

• PublishedLife cycle assessment of a novel tannin-boron association for wood protection
  Hu, J., Skinner, C., Ormondroyd, G. & Thevenon, M.-F., 1 Feb 2023, In: Science of the Total Environment. 858, 1, 159739.
  Research output: Contribution to journal › Article › peer-review
• PublishedParticleboards Bonded by an Imidazole-Based Adhesive System
  Scharf, A., Popescu, C.-M., Dernegard, H., Oja, J., Ormondroyd, G., Medved, S., Sandberg, D. & Jones, D., 17 Nov 2023, In: Materials. 16, 22, 19 p., 7201.
  Research output: Contribution to journal › Article › peer-review
• PublishedUK patent application GB2616126
  Jacob, M. (Inventor), Curling, S. (Inventor) & Ormondroyd, G. (Inventor), 30 Aug 2023, Patent No. GB2616126, 28 Feb 2023, Priority date 28 Feb 2022
  Research output: Patent
• PublishedWood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability
  Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., Feb 2023, In: European Journal of Wood and Wood Products. 81, 1, p. 5-19
  Research output: Contribution to journal › Article › peer-review

2022

• PublishedAn investigation on the possible use of coffee silverskin in PLA/PBS composites
  Aghaye Ghazvini, A. K., Curling, S., Ormondroyd, G., Saccani, A. & Sisti, L., 10 Jun 2022, In: Journal of Applied Polymer Science. 139, 22, 10 p., 52264.
  Research output: Contribution to journal › Article › peer-review
• PublishedChallenges in Drying Resin Modified Wood
  Pitman, A., Stefanowski, B., Spear, M., Dimitriou, A., Curling, S., Kupfernagel, C. & Ormondroyd, G., 5 Jul 2022, p. 33. 1 p.
  Research output: Contribution to conference › Paper
• PublishedEffects of Biological and Chemical Degradation on the Properties of Scots ine Wood—Part I: Chemical Composition and Microstructure of the CellWall
  Broda, M., Popescu, C. M., Curling, S., Timpu, D. I. & Ormondroyd, G., 22 Mar 2022, In: Materials. 15, 7, 15 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedEffects of Biological and Chemical Degradation on the Properties of Scots Pine Wood-Part I: Chemical Composition and Microstructure of the Cell Wall
  Broda, M., Popescu, C.-M., Curling, S. F., Timpu, D. I. & Ormondroyd, G. A., 22 Mar 2022, In: Materials. 15, 7
  Research output: Contribution to journal › Article › peer-review
• PublishedEffects of Process Variables on Wood Modification with PF Resin
  Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 5 Jul 2022, p. 29-31. 3 p.
  Research output: Contribution to conference › Paper
• PublishedEffekt von Prozessvariablen bei Holzmodifikation mit PF-Harz
  Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 7 Apr 2022. 2 p.
  Research output: Contribution to conference › Paper
• PublishedEvaluation of the Effect of a Combined Chemical and Thermal Modification of Wood though the Use of Bicine and Tricine
  Jones, D., Krzisnik, D., Hocevar, M., Zagar, A., Humar, M., Popescu, C.-M., Popescu, M.-C., Brischke, C., Nunes, L., Curling, S., Ormondroyd, G. & Sandberg, D., Jun 2022, In: Forests. 13, 6
  Research output: Contribution to journal › Article › peer-review
• PublishedMoisture Interactions of wool and wool-based composites
  Curling, S. & Ormondroyd, G., 5 Aug 2022, Wool Fiber Reinforced Polymer Composites. 1 ed. Oxford, United Kingdom : Woodhead Publishing Ltd, Vol. 1. p. 319 - 330 11 p. (The Textile Institute Book Series).
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedPercussion Nd:YAG Laser-incision of Radiata Pine: Effects of Laser Processing Parameters and Wood Anatomy
  Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Curling, S., Pitman , A. & Mason , P., Jun 2022, In: Lasers in Manufacturing and Materials Processing. 9, 2, p. 173-192
  Research output: Contribution to journal › Article › peer-review
• PublishedPhenol Formaldehyde Resin Treatment of End Grain Cobbles for Flooring and Paving Applications
  Spear, M., Jones, D., Miles, C. & Ormondroyd, G., 25 Apr 2022, p. 407-414. 8 p.
  Research output: Contribution to conference › Paper
• PublishedThe Effect of Material Fatigue on Differently Modified Wood
  Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 25 Apr 2022, p. 292-300. 9 p.
  Research output: Contribution to conference › Paper
• PublishedThe effect of the changes in chemical composition due to thermal treatment on the mechanical properties of Pinus densiflora
  Peng, Q., Spear, M., Ormondroyd, G. & Chang, W.-S., 5 Dec 2022, In: Construction and Building Materials. 358, 129303.
  Research output: Contribution to journal › Article › peer-review
• PublishedThe environmental and social impacts of modified wood production: effect of timber sourcing
  Roberts, G., Skinner, C. & Ormondroyd, G., 2 Oct 2022, In: International Wood Products Journal. 13, 4, p. 236-254 19 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedUse of DMA to Evaluate the Modification of Tropical Hardwood Timbers by Cashew Nut Shell Liquid (CNSL) Resin
  Spear, M., Ashaduzzaman, M., Ormondroyd, G. & Hale, M., 25 Apr 2022, p. 142-145. 4 p.
  Research output: Contribution to conference › Poster

2021

• PublishedGap-Fillers for Wooden Artefacts Exposed Outdoors—A Review
  Broda, M., Kryg, P. & Ormondroyd, G. A., 12 May 2021, In: Forests. 12, 5, e606.
  Research output: Contribution to journal › Review article › peer-review
• PublishedReview of Functional Treatments For Modified Wood
  Spear, M., Curling, S., Dimitriou, A. & Ormondroyd, G., 12 Mar 2021, In: Coatings. 11, 3, 29 p., 327.
  Research output: Contribution to journal › Article › peer-review
• PublishedThe Viscoelastic Behaviour of Waterlogged Archaeological Wood Treated with Methyltrimethoxysilane
  Broda, M., Spear, M., Curling, S. & Ormondroyd, G., 8 Sept 2021, In: Materials. 14, 18, 20 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedWood Modification with Phenol Formaldehyde Resin and its Influence on the Dimensional Stability of Homegrown and Imported Hardwoods
  Kupfernagel, C., Spear, M., Pitman, A. & Ormondroyd, G., 14 Oct 2021, p. 12-15. 4 p.
  Research output: Contribution to conference › Paper

2020

• PublishedCO2 laser interactions with wood tissues during single pulse laser-incision
  Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman , A., Sahoo, S., Curling, S. & Mason, P., 1 Jun 2020, In: Optics and Laser Technology. 126, 21 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedDynamic mechanical analysis of Scots pine and three tropical hardwoods
  Ashaduzzaman, M., Hale, M., Ormondroyd, G. & Spear, M., Oct 2020, In: International Wood Products Journal. 11, 4, p. 189-203
  Research output: Contribution to journal › Article › peer-review
• PublishedLaser incising of wood: A Review
  Nath, S., Waugh, D., Ormondroyd, G., Spear, M., Pitman, A., Curling, S. & Mason, P., 2020, In: Lasers in Engineering. 45, 4-6, p. 381-403 23 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedObserved and projected changes in the climate based decay hazard of timber in the United Kingdom
  Curling, S. & Ormondroyd, G., 1 Oct 2020, In: Scientific Reports. 10, 8 p., 16287 (2020).
  Research output: Contribution to journal › Article › peer-review
• PublishedProperties of LIGNIA modified wood
  Stefanowski, B. K., Spear, M., Curling, S., Pitman , A., Bailey, R., Mathias, J., Evans, N., Ayala, L., Theobald, T. & Ormondroyd, G., 9 Sept 2020, p. 177-188. 12 p.
  Research output: Contribution to conference › Paper
• PublishedThe effects of fatigue cycling on acetylated, thermally treated and PF-modified Scots pine
  Kupfernagel, C., Curling, S., Spear, M. & Ormondroyd, G., 9 Sept 2020, p. 153-164. 12 p.
  Research output: Contribution to conference › Paper

2019

• PublishedCarbon footprint assessment of the North Wales and Mersey Dee economic area
  Ormondroyd, G. & Skinner, C., 6 Jun 2019, 37 p.
  Research output: Book/Report › Commissioned report
• PublishedComparison of accelerated weathering and field exposed resin modified timber
  Stefanowski, B., Bailey, R., Spear, M., Ormondroyd, G. & Pitman, A., 3 Jul 2019, p. 119-130. 12 p.
  Research output: Contribution to conference › Paper
• PublishedConservation process of archaeological waterlogged wood studied by spectroscopy and gradient NMR methods
  Kowalczuk, J., Rachocki, A., Broda, M., Mazela, B., Ormondroyd, G. & Trite-Goc, J., Nov 2019, In: Wood Science and Technology. 53, 6, p. 1207-1222 16 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedFlax/Epoxy Composite Beams - Simulation of Flexural Stresses
  Ormondroyd, G., Raghavalu Thirumalai, D. & Zhongwei, G., 1 Apr 2019, In: Material Today: Proceedings. 8, 3, p. 760-768
  Research output: Contribution to journal › Article › peer-review
• PublishedLaser incision of wood for the modification of liquid impregnation
  Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 3 Jul 2019, p. 55-67. 13 p.
  Research output: Contribution to conference › Paper
• PublishedModel study to compare drying rate through laser incisions in beech wood
  Spear, M., Pitman, A., Nath, S., Miles, C., Waugh, D., Mason, P. & Ormondroyd, G., 3 Jul 2019, p. 69-78. 10 p.
  Research output: Contribution to conference › Paper
• PublishedModelling and Simulation of Natural Fibre/Epoxy Composites - Prediction of Stress State and Deformations
  Prabhakaran, R. T. D., Gupta, M., Mahajan, P. & Ormondroyd, G. A., 2019, In: International Journal of Materials Engineering Innovation . 10, 2
  Research output: Contribution to journal › Article › peer-review
• PublishedPlants and architecture: the role of biology and biomimetics in materials development for buildings
  Raghavalu Thirumalai, D., Spear, M., Curling, S., Ormondroyd, G., Wootton-Beard, P. C., Donnison, I. & Jones, P., 2019, In: Intelligent Buildings International. 11, 3-4, p. 178-211
  Research output: Contribution to journal › Article › peer-review
• PublishedScale up of mild thermal modification for cladding and joinery products
  Spear, M., Curling, S. & Ormondroyd, G., 3 Jul 2019, p. 113-117. 5 p.
  Research output: Contribution to conference › Paper
• PublishedScience to Policy: Nature-based solutions for the built environment
  Wiik, E., Ormondroyd, G., Spear, M., Curling, S., Raghavalu Thirumalai Prabhakaran, D., Donnison , I., Robson, P., Bosch, M., Wootton-Beard, P. C., Hindhaugh, R., Jones, P., Waldron, D., Xing, Y. & Toberman, H., Mar 2019, Ser Cymru National Research Network for Low Carbon, Energy and Environment. (Science to Policy)
  Research output: Book/Report › Commissioned report
• PublishedWood based panels in modern methods of construction for housing: greenhouse gas abatement analysis
  Spear, M., Norton, A., Hill, C., Price, C. & Ormondroyd, G., 8 Oct 2019, p. 95-108. 14 p.
  Research output: Contribution to conference › Paper
• PublishedWood in Construction in the UK: An Analysis of Carbon Abatement Potential. Extended Summary. Published as an annex to the Committee on Climate Change report "Biomass in a low-carbon economy".
  Spear, M., Hill, C., Norton, A., Price, C. & Ormondroyd, G., 18 Jul 2019, Committee on Climate Change. 28 p.
  Research output: Book/Report › Commissioned report › peer-review

2018

• PublishedASSESSMENT AND MONITORING OF AESTHETIC APPEARANCE OF BUILDING BIOMATERIALS DURING THE SERVICE LIFE
  Sandak, A., Sandak, J., Dimitriou, A., Burud, I., Thiis, T., Gobakken, L. R., Ormondroyd, G. A. & Kraniotis, D., 2018, SUSTAINABLE DEVELOPMENT AND PLANNING IX. Vol. 226. p. 527-536 (WIT Transactions on Ecology and the Environment).
  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review
• PublishedAdding value to UK grown timber in construction: a challenging opportunity in a future market
  Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 71-73 3 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedBiogenic carbon: its joint roles in bioenergy and carbon sequestration
  Spear, M., Norton, A., Hill, C., Raghavalu Thirumalai, D. & Ormondroyd, G., 6 Sept 2018, p. 53. 1 p.
  Research output: Contribution to conference › Paper
• PublishedBroadband dielectric measurement & simulation of e-field curing systems
  Parker, N., Cuenca, J., Gumbleton, R., Dimitriou, A., Ormondroyd, G. & Slocombe, D., 26 Jun 2018, Timber 2018 . Spear, M. (ed.). London, p. 89-98 10 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedCOMPUTER MODEL FOR THE SIMULATION OF RELATIVE HUMIDITY OF AN INDOOR ENVIRONMENT
  Raghavalu Thirumalai, D., Spear, M., Curling, S. & Ormondroyd, G., Oct 2018, Proceedings of 29th Inter-American Congress of Chemical Engineering incorporating the 68th Canadian Chemical Engineering Conference. 1 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedDesigning with Natural Materials
  Ormondroyd, G. (Editor), 5 Sept 2018, CRC Press. 352 p.
  Research output: Book/Report › Book
• PublishedDoes combining biobased building materials with timber based construction elements have an effect on biological durability?
  Curling, S., Stefanowski, B. & Ormondroyd, G., 15 Jun 2018.
  Research output: Contribution to conference › Paper
• PublishedExploring Design Principles of Biological and Living Building Envelopes: What Can We Learn from Plant Cell Walls?
  Xing, Y., Bosch, M., Spear, M., Donnison , I., Ormondroyd, G. & Jones, P., 2018, In: Intelligent Buildings International. 10, 2, p. 78-102
  Research output: Contribution to journal › Article › peer-review
• PublishedFLEXURAL PERFORMANCE OF BIOBASED COMPOSITES - INSULATION FIBRES AS CORES FOR SANDWICH CONSTRUCTION
  Raghavalu Thirumalai, D., Spear, M., Curling, S., Zhongwei, G. & Ormondroyd, G., 28 Oct 2018. 1 p.
  Research output: Contribution to conference › Abstract › peer-review
• PublishedFluid flow in wood: investigation of the influence of laser incision parameters on uptake and flow paths in four wood species
  Spear, M., Holmberg, J., Nath, S., Pitman, A., Waugh, D., Mason, P., Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018. Spear, M. (ed.). London, p. 137-144 8 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedHeat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels
  Huang, P., Chew, Y. M., Chang, W.-S., Ansell, M., Lawrence, M., Latif, E., Shea, A., Ormondroyd, G. & Du, H., 30 Mar 2018, In: Construction and Building Materials. 166, p. 35-49 15 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedInsights into stability of glued joints between thermally modified timber: adaptation of an artificial weathering test
  Spear, M., Teciu, R. & Ormondroyd, G., 17 Sept 2018, Proceedings of 9th European Conference on Wood Modification. Creemers, J. (ed.). 6 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedLaser Incision of woods: effects on liquid penetration
  Nath, S., Waugh, D., Spear, M., Ormondroyd, G., Pitman, A. & Mason, P., 14 Oct 2018. 9 p.
  Research output: Contribution to conference › Poster › peer-review
• PublishedPotential effects of climate change on durability of timber and wood based building materials
  Curling, S. & Ormondroyd, G., 26 Jun 2018, Timber 2018 . Spear, M. (ed.). p. 193-200 8 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedSIMULATION MODEL TO EVALUATE HUMAN COMFORT FACTORS FOR AN OFFICE IN A BUILDING
  Raghavalu Thirumalai, D., Curling, S., Spear, M. & Ormondroyd, G., 24 Aug 2018, MDPI AG Proceedings Journal. Vol. 2(15). p. 1126 4 p. https://doi.org/10.3390/proceedings2151126
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedSimulation of flexural stresses on layered natural fibre/epoxy composite beams
  Raghavalu Thirumalai, D., Ormondroyd, G. & Zhongwei, G., 1 Jul 2018, PROCEEDINGS OF THE 4th BRAZILIAN CONFERENCE ON COMPOSITE MATERIALS. July 2018, p. 898-906 9 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedVOC emissions from the combustion of low-grade lignocellulosic waste
  Dimitriou, A., Roberts, P. & Ormondroyd, G., Oct 2018, In: International Wood Products Journal.
  Research output: Contribution to journal › Article › peer-review

2017

• PublishedA rapid screening method to determine the susceptibility of bio-based construction and insulation products to mould growth
  Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Jan 2017, In: International Biodeterioration and Biodegradation. p. 124-132 8 p., 116.
  Research output: Contribution to journal › Article › peer-review
• PublishedASSESSMENT AND MONITORING OF AESTHETIC APPEARANCE OF BUILDING BIOMATERIALS ALONG THE SERVICE LIFE
  Ormondroyd, G. & Dimitriou, A., 2017, In: WIT Transactions on Ecology and the Environment . 226, p. 527 536 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedAdding value to UK grown timber by CLT production: A KTP project
  Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 4 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor University, p. 177-178 2 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedAn Industry Prioritised survey of thermal, mechanical, hydro and decay properties of natural fibre insulation materials
  Ormondroyd, G., Stefanowski, B., Mansour, E., Spear, M. & Curling, S., 5 Oct 2017, Proceedings of the International Panel Products Symposium 2017. Bangor, UK, p. 179-184 6 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedAssessment and monitoring of aesthetic appearance of building biomaterials along the service life
  Ormondroyd, G. & Dimitriou, A., 2017, Proceedings of Timber Structures 2017. p. 1 11 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedAssessment of lignocellulosic nut wastes as an absorbent for gaseous formaldehyde
  Stefanowski, B., Curling, S. & Ormondroyd, G., 1 Apr 2017, In: Industrial Crops and Products. 98, April, p. 25-28 4 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedAssessment of the use of dynamic mechanical analysis to investigate initial onset of brown rot decay of Scots pine (Pinus sylvestris L.)
  Ormondroyd, G., Alfredsen, G., Raghavalu Thirumalai, D., Curling, S., Stefanowski, B., Spear, M. & Gobakken, L. R., May 2017, In: International Biodeterioration and Biodegradation. 120, p. 1-5 5 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedEffectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products
  Curling, S., Jones, D., Ormondroyd, G. & Williams, A., 2017, In: Arab Gulf Journal of Scientific Research. 34, 2/3
  Research output: Contribution to journal › Article › peer-review
• PublishedEffects of Methyl Methacrylate impregnation on durability of timber.
  Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 7 Sept 2017, Building with bio-based materials: Best practice and performance specification: Final Cost ation FP1303 Conference. University of Zagreb
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedEffects of Methyl Methacrylate impregnation on physical properties of timber
  Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 13 Sept 2017, p. 22-24.
  Research output: Contribution to conference › Paper
• PublishedEmissions from bio-based building products
  Clauder, L., Ormondroyd, G., Mansour, E. & Pfriem, A., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia, p. 1-2 2 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedFeasibility of using straw in a strong, thin, pulp moulded packaging material
  Curling, S., Laflin, N., Davies, G., Ormondroyd, G. & Elias, R., Mar 2017, In: Industrial Crops and Products. 97, p. 395-400
  Research output: Contribution to journal › Article › peer-review
• PublishedImplications of synergistic durability relationships on design of construction elements.
  Curling, S. & Ormondroyd, G., 1 Mar 2017, COST FP1303 Design, Application and Aesthetics of biobased building materials. Sofia: European Cooperation in Science and Technology (COST), p. 17-18 2 p.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedImprovement of Indoor Air Quality by MDF panels containing walnut shells
  Stefanowski, B., Ormondroyd, G., Da Silva, C. F., Maskell, D., Ansell, M. P., Dengel, A. & Ball, R. J., Oct 2017, In: Building and Environment. 123, p. 427-436
  Research output: Contribution to journal › Article › peer-review
• PublishedKnowledge Transfer Partnership. Adding value to UK grown timber in construction
  Dimitriou, A., Ellis, P., Spear, M., Curling, S., Jones, R. & Ormondroyd, G., 6 Sept 2017.
  Research output: Contribution to conference › Paper › peer-review
• PublishedLaboratory test to determine the effect on durability of combining biobased building materials with timber in construction
  Curling, S. & Ormondroyd, G., 4 Jun 2017. 10 p.
  Research output: Contribution to conference › Paper
• PublishedMDF Recovery: Recycled MDF technologies for routed and laminated applications
  Ormondroyd, G., Curling, S. & Elias, R., 1 Mar 2017.
  Research output: Contribution to conference › Poster
• PublishedMechanical Characterisation of Green Sandwich Panels – Biomaterial Skins and Natural Fibre Cores
  Raghavalu Thirumalai, D., A. Nassir, N., Ormondroyd, G. & Zhongwei, G., 16 Nov 2017, English.
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedNon-wood bio-based materials: Wool
  Ormondroyd, G. & Mansour, E., 2017, Performance of Bio-based building materials . 1 ed. Cambridge,UK: Woodhead Publishing Ltd, p. 128-141 13 p.
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedPerformance of buildings: Indoor air quality
  Stefanowski, B., Curling, S. & Ormondroyd, G., 21 Jul 2017, Performance of biobased building materials. Jones, D. & Brischke, C. (eds.). 1st Edition ed. Duxford, UK: Woodhead Publishing Ltd, p. 351-365
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedPhysical properties and durability of methacrylate impregnated timber
  Curling, S., Spear, M., Ormondroyd, G. & Gibson, R., 28 Sept 2017, Proceedings of the 13th Annual Northern European Network for Wood Science and Engineering Conference. Copenhagen: Univeristy Of Copenhagen
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• PublishedSimulation of RF fields for wood gluing applications
  Parker, N., Cuenca, J., Dimitriou, A., Ormondroyd, G. & Slocombe, D., 21 Sept 2017.
  Research output: Contribution to conference › Paper › peer-review
• PublishedThe water vapour sorption characteristics and kinetics of different wool types
  Ormondroyd, G., Curling, S., Mansour, E. & Hill, C., 2017, In: Journal of the Textile Institute. 108, 7, p. 1198-1210
  Research output: Contribution to journal › Article › peer-review
• PublishedWood as a biobased building material: Wood plastic composites.
  Ormondroyd, G. & Kers, J., 2017, Performance of Bio-based building materials . 1 ed. Cambridge: Woodhead Publishing Ltd, p. 61-67 7 p.
  Research output: Chapter in Book/Report/Conference proceeding › Chapter

2016

• PublishedAbsorption of Volatile Organic Compounds by Different Wool Types
  Mansour, E., Curling, S. F., Stéphan, A. & Ormondroyd, G. A., Mar 2016, In: Green Materials. 4, 1
  Research output: Contribution to journal › Article › peer-review
• PublishedChemical composition of natural fibres
  Ormondroyd, G. & Curling, S., 12 Oct 2016, Advanced High Strength Natural Fibre Composites in Construction. Fan, M. & Fu, F. (eds.). 1 ed. Cambridge, UK: Woodhead Publishing Ltd, p. 23-58 35 p.
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedEffectiveness of a wool based packaging system on the abundance of surface spoilage microorganisms on meat products
  Lahmer, R. A., Morris, A., Curling, S., Ormondroyd, G., Jones, D. & Williams, A., May 2016, In: Assiut Journal of Agricultural Sciences (AJAS). 47, 2, p. 24-28
  Research output: Contribution to journal › Article › peer-review
• PublishedEvaluating mould colonisation and growth on MDF panels modified to sequester Volatile Organic Compounds
  Stefanowski, B., Ormondroyd, G. & Curling, S., Dec 2016, In: International Wood Products Journal. 7, 4, p. 188-194
  Research output: Contribution to journal › Article › peer-review
• PublishedImproving the impact of plant science on urban planning and design
  Wootton-Beard, P. C., Xing, Y., Raghavalu Thirumalai, D., Robson, P., Bosch, M., Thornton, J. M., Ormondroyd, G., Jones, P. & Donnison, I., 16 Nov 2016, In: Buildings. 6, 4, 48.
  Research output: Contribution to journal › Article › peer-review
• PublishedInfluence of water and humidity on chemically modifying wood with polybutylene succinate bio-polyester
  Noel, M., Grigsby, W. J., Ormondroyd, G. & Spear, M., Jun 2016, In: International Wood Products Journal. 7, 2, p. 80-88
  Research output: Contribution to journal › Article › peer-review
• PublishedLife cycle assessment of pilot-scale wood fibre production using mechanical disc refining at different pressures
  Skinner, C., Stefanowski, B., Heathcote, D., Charlton, A. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 149-155
  Research output: Contribution to journal › Article › peer-review
• PublishedMild thermal modification to add value to UK grown larch: monitoring quality, physical properties and benefits
  Spear, M., Dimitriou, A., Binding, T. & Ormondroyd, G., 10 Mar 2016, Forest Resource and Products: Moving Toward a Sustainable Future .
  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• PublishedSheep wool insulation for the absorption of volatile organic compounds
  Mansour, E., Marriott, R. & Ormondroyd, G., 12 Apr 2016.
  Research output: Contribution to conference › Paper › peer-review
• PublishedThe Opportunities and Challenges for Re-use and Recycling of Timber and Wood Products Within the Construction Sector
  Ormondroyd, G. A., Spear, M. J. & Skinner, C. J., 22 Mar 2016, Environmental Impacts of Traditional and Innovative Forest-based Bioproducts; Environmental Footprints and Eco-design of Products and Processes. Muthu, S. S. & Kutnar, A. (eds.). Springer, p. 45-103 59 p.
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedThe effect on panel properties of incorporation of reject paper fibre into MDF panels
  Curling, S., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G., 2016, In: International Wood Products Journal. 7, 3, p. 165-170 6 p.
  Research output: Contribution to journal › Article › peer-review
• PublishedWater sorption, surface structure and surface energy characteristics of wood composite fibres refined at different pressures
  Ormondroyd, G. A., Källbom, S. K., Curling, S. F., Stefanowski, B. K., Segerholm, B. K., Wålinder, M. E. & Jones, D., 19 Feb 2016, In: Wood Material Science and Engineering. 12, 4, p. 203-210
  Research output: Contribution to journal › Article › peer-review

2015

• PublishedAbsorption of Formaldehyde by different wool types
  Mansour, E., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 285-288.
  Research output: Contribution to conference › Paper
• PublishedAdhesives for wood composites
  Ormondroyd, G. A. & Ansell, M. P. (Editor), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 47-66
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedApplicability of wood durability testing methods to bio-based building materials
  Curling, S. F., Stefanowski, B. K., Mansour, E. & Ormondroyd, G. A., 10 May 2015.
  Research output: Contribution to conference › Paper
• PublishedBiobased and Bioinspired materials for a modern building design - a research perspective
  Spear, M. J., Raghavalu Thirumalai, D. P., Durai Prabhakaran, R. T., Ormondroyd, G. A., Curling, S. F. & Spear, M., 7 Oct 2015, p. 293-296.
  Research output: Contribution to conference › Paper
• PublishedChemical changes in mild thermal treatment of larch: to what extent do they differ from full thermal modification?
  Spear, M. J., Cowley, C. D., Binding, T., Dimitriou, A. & Ormondroyd, G. A., 26 Oct 2015.
  Research output: Contribution to conference › Paper
• PublishedDevelopment of a laboratory testing concept for whole bio- based wall components against fungal colonisation.
  Curling, S., Ormondroyd, G., Mansour, E. & Stefanowski, B., 2015.
  Research output: Contribution to conference › Paper › peer-review
• PublishedDevelopment of a laboratory testing concept for whole bio-based wall components against fungal colonization
  Stefanowski, B. K., Curling, S. F., Stefanowski, B., Mansour, E. & Ormondroyd, G. A., 4 Mar 2015.
  Research output: Contribution to conference › Paper
• PublishedDevelopment of a rapid screening method to determine the susceptibility to mould growth of novel construction and insulation products
  Stefanowski, B. K., Curling, S. F., Mansour, E. & Ormondroyd, G. A., 10 May 2015.
  Research output: Contribution to conference › Paper
• PublishedEmissions from bio-based building products
  Clauder, L., Mansour, E., Ormondroyd, G. A. & Pfriem, A., 26 Oct 2015.
  Research output: Contribution to conference › Paper
• PublishedEvaluating the optimization of wood modification with polybutylene succinate bio-polyester
  Spear, M. J., Noel, M., Ormondroyd, G. A., Grigsby, W. & Volkmer, T., 26 Oct 2015.
  Research output: Contribution to conference › Paper
• PublishedEvaluation of differences in thermal modification as a result of depth profiling. Preliminary investigations into material treated using the Firmolin process
  Segerholm, K., Jones, D., Rautkari, L., Olsson, S., Ormondroyd, G. A., Mansour, E., Leung, G. & Willems, W., 26 Oct 2015.
  Research output: Contribution to conference › Paper
• PublishedFibreboards and their applications
  Stefanowski, B. K., Ormondroyd, G. A., Stefanowski, B. & Ansell, M. P. (Editor), 1 Aug 2015, Wood Composites. 2015 ed. Woodhead Publishing Ltd, p. 91-102
  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• PublishedIntroduction of the COST FP 1303 Cooperative Performance Test
  Humar, M., Brischke, C., Meyer, L., Lesar, B., Thaler, N., Jones, D., Bardage, S., Belloncle, C., Van den Bulcke, J., Abascal, J. M., Alfredsen, G., Baisch, D., Brunnhuber, B., Cofta, G., Grodås, E., Frühwald Hansson, E., Irle, M., Kallakas, H., Kers, J., Klamer, M., Larsson Brelid, P., Maider, A. B., Mahnert, K. C., Melcher, E., Möller, R., Noël, M., Nunes, L., Ormondroyd, G. A., Palanti, S., Pfabigan, N., Pilgård, A., Rapp, A. O., Schumacher, P., Suttie, E., Teppand, T., Touza, M. & Van Acker, J., 14 May 2015.
  Research output: Contribution to conference › Paper
• PublishedLife cycle assessment of a novel tannin-boron association for wood protection
  Hu, J. B., Skinner, C., Ormondroyd, G. A., Pizzi, G. T. & Thevenon, M. F., 25 Aug 2015.
  Research output: Contribution to conference › Paper
• PublishedModified wood: review of efficacy and service life testing
  Ormondroyd, G. A., Spear, M. J. & Curling, S. F., Aug 2015, In: Proceedings of the ICE - Construction Materials. 168, 4, p. 187-203
  Research output: Contribution to journal › Article › peer-review
• PublishedNatural insulation fibres for the absorption of indoor volatile organic compounds
  Ormondroyd, G., Curling, S., Mansour, E. & Marriott, R., 2015.
  Research output: Contribution to conference › Paper › peer-review
• PublishedPhysical properties of UK grown larch subjected to mild and moderate thermal modification processes
  Spear, M., Binding, T., Nicholls, J., Jenkins, D. & Ormondroyd, G., 14 Sept 2015.
  Research output: Contribution to conference › Paper
• PublishedRestoration of Degraded Urban Ecosystems for Healthy Cities – Developing technical and scientific references for Nature-Based solutions
  Xing, Y., Jones, P., Ormondroyd, G. A. & Curling, S. F., 15 Nov 2015, p. 90.
  Research output: Contribution to conference › Paper
• PublishedThe sorption of Volatile Organic Compounds (VOCS) by modified MDF panels and effects on mould colonisation and growth
  Stefanowski, B. K., Stefanowski, B., Curling, S. F. & Ormondroyd, G. A., 7 Oct 2015, p. 175-184.
  Research output: Contribution to conference › Paper
• PublishedWhat new can the COST FP1006 Round Robin test provide to our knowledge on wood weathering?
  Cowley, C. D., Sandak, J., Sandak, A., Fellin, M., Riggio, M., Burud, I., Gobakken, L. R., Csiha, C., Bak, M., Róbert, N., Noël, M., Can, A., Sivrikaya, H., Marszall, A., Orlem, A. P., Meija-Feldmane, A., Andersons, B., Cowley, C., Ormondroyd, G. A., Mòdol, E. C., Papadopoulou, E., Tondi, G., Militz, H., Heinze, P., Wuijtens, I., Modzelewska, I., Arnold, M., Delucis, R. A., Diaz, R. H., Kärki, T. & Mottonen, V., 9 Apr 2015.
  Research output: Contribution to conference › Paper

2014

• PublishedAssessment of health implications related to processing and use of natural wool insulation products
  Mansour, E., Loxton, C., Elias, R. M. & Ormondroyd, G. A., 1 Dec 2014, In: Environment International. 73, p. 402-412
  Research output: Contribution to journal › Article › peer-review
• PublishedEquilibrium and dynamic vapour water sorption properties of biochar derived from apple wood
  Popescu, C., Hill, C. A., Anthony, R., Ormondroyd, G. A. & Curling, S., 28 Nov 2014, In: Polymer Degradation and Stability. 111, p. 263-268
  Research output: Contribution to journal › Article › peer-review
• PublishedEvaluation of the mechanical properties of cross laminated bamboo panels by digital image correlation and finite element modeling
  Archila, H. F., Brandon, D., Ansell, M. P., Walker, P. & Ormondroyd, G. A., 13 Aug 2014.
  Research output: Contribution to conference › Paper
• PublishedGuest Editorial
  Spear, M. (Editor) & Ormondroyd, G. (Editor), 3 Sept 2014, In: International Wood Products Journal. 5, 3, p. 129 1 p.
  Research output: Contribution to journal › Editorial
• PublishedMicromorphological studies of surface densified wood
  Laine, K., Segerholm, K., Walinder, M., Rautkari, L., Ormondroyd, G. A., Hughes, M. & Jones, D., 1 Mar 2014, In: Journal of Materials Science. 49, 5, p. 2027-2034
  Research output: Contribution to journal › Article › peer-review
• PublishedMild thermal modification to enhance the machinability of larch
  Spear, M. J., Binding, T., Jenkins, D., Nicholls, J. & Ormondroyd, G. A., 10 Mar 2014.
  Research output: Contribution to conference › Paper
• PublishedOcean Warming, More than Acidification, Reduces Shell Strength in a Commercial Shellfish Species during Food Limitation
  Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 28 Jan 2014, In: PLoS ONE. 9, 1, p. e86764
  Research output: Contribution to journal › Article › peer-review
• PublishedSurface energy characteristics of fibres refined at different pressures
  Källbom, S., Ormondroyd, G. A., Segerholm, B. K., Jones, D. & Wålinder, M. E., 17 Sept 2014.
  Research output: Contribution to conference › Paper
• PublishedThe role of hydroxyl groups in determining the sorption p roperties of modified wood
  Rautkari, L., Curling, S. F., Ormondroyd, G. A., Xie, Y. & Jalaludin, Z., 11 Mar 2014.
  Research output: Contribution to conference › Paper
• PublishedThe role of hydroxyl groups in determining the sorption properties of modified wood
  Hill, C., Curling, S. & Ormondroyd, G., 2014.
  Research output: Contribution to conference › Paper › peer-review
• PublishedThe water vapour sorption behaviour of acetylated birch wood: how acetylation affects the sorption isotherm and accessible hydroxyl content
  Popescu, C. M., Hill, C. A., Curling, S. F., Ormondroyd, G. A. & Xie, Y., 1 Mar 2014, In: Journal of Materials Science. 49, 5, p. 2362-2371
  Research output: Contribution to journal › Article › peer-review

2013

• PublishedEffect of bio-resin from cashew nut shell liquid (CNSL) on wood decay resistance
  Tverezovskiy, V., Ashaduzzaman, M., Hale, M. D., Tverezovskiy, V. V. & Ormondroyd, G. A., 20 Jun 2013.
  Research output: Contribution to conference › Paper
• PublishedEffect on panel properties following incorporation of reject paper fibre into MDF at a pilot scale
  Stefanowski, B. K., Laflin, N. J., Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 22 May 2013.
  Research output: Contribution to conference › Paper
• PublishedEffects of climate change on biomineralization in a commercial shellfish species, Mytilus edulis L.
  Mackenzie, C. L., Ormondroyd, G. A., Curling, S. F., Ball, R. J., Whiteley, N. M. & Malham, S. K., 13 Mar 2013.
  Research output: Contribution to conference › Paper
• PublishedEffects on panel properties following incorporation of reject paper fibre into MDF
  Curling, S. F., Stefanowski, B., Laflin, N., Davies, G. & Ormondroyd, G. A., 10 Oct 2013.
  Research output: Contribution to conference › Paper
• PublishedWhat is the role of the accessibility of wood hydroxyl groups in controlling moisture content?
  Rautkari, L., Hill, C. A., Curling, S. F., Jalaludin, Z. & Ormondroyd, G. A., 1 Sept 2013, In: Journal of Materials Science. 48, 18, p. 6352-6356
  Research output: Contribution to journal › Article › peer-review

2012

• PublishedA rapid method for investigating the absorption of formaldehyde from air by wool
  Curling, S. F., Loxton, C. & Ormondroyd, G. A., 1 Apr 2012, In: Journal of Materials Science. 47, 7, p. 3248-3251
  Research output: Contribution to journal › Article › peer-review
• PublishedGuest Editorial
  Spear, M. (Editor) & Ormondroyd, G. (Editor), May 2012, In: International Wood Products Journal. 3, 1, p. 1 1 p.
  Research output: Contribution to journal › Editorial
• PublishedOil Heat Treatment of Timber for Reduced Hygroscopicity
  Spear, M. J., Spear, M., Fleurentdidier, V., Stefanowski, B. & Ormondroyd, G. A., 7 Sept 2012.
  Research output: Contribution to conference › Paper

2011

• PublishedMadera modificada: un futuro robusto para la utilización de la madera
  Ormondroyd, G. A., 30 Sept 2011.
  Research output: Contribution to conference › Paper
• PublishedWood Composites in Modern Methods of Construction: applications and environmental considerations
  Jones, D., Ormondroyd, G. A., Lawther, M. & Tweed, C., 6 Oct 2011.
  Research output: Contribution to conference › Paper

2010

• PublishedComparisons of particleboard produced from Acacia hybrid and a UK commercial particleboard furnish from recycled wood.
  Suffian, M., Ormondroyd, G. A. & Hale, M. D., 1 Jan 2010, In: Journal of Tropical Forest Science. 22, 3, p. 227-236
  Research output: Contribution to journal › Article › peer-review

2007

• PublishedChanges in Cell Wall Volume due to Reaction of Wood with Acetic Anhydride
  Hill, C. A., Kwon, J. H. & Ormondroyd, G. A., 16 Oct 2007.
  Research output: Contribution to conference › Paper
• PublishedChanges in the cell wall volume of a number of wood species due to reaction with acetic anhydride
  Kwon, J. H., Hill, C. A., Ormondroyd, G. A. & Karim, S., 1 Mar 2007, In: Holzforschung. 61, 2, p. 138-142
  Research output: Contribution to journal › Article › peer-review

2006

• PublishedA study of the Dimensional Stabilisation of Rubberwood by Reaction with Acetic and Hexanoic Anhydride
  Hill, C., Rafidah, S., Hill, C. A. & Ormondroyd, G. A., 1 Jan 2006, In: Journal of Tropical Forest Science. 18, 4, p. 261-268
  Research output: Contribution to journal › Article › peer-review
• PublishedThe decay resistance of anhydride-modified Corsican pine exposed to the brown rot fungus Coniophora puteana
  Hill, C. A., Hale, M. D., Ormondroyd, G. A., Kwon, J. H. & Forster, S. C., 1 Nov 2006, In: Holzforschung. 60, 6, p. 625-629
  Research output: Contribution to journal › Article › peer-review

2005

• PublishedAn investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood.
  Hill, C., Hill, C. A., Forster, S. C., Farahani, M. R., Hale, M. D., Ormondroyd, G. A. & Williams, G. R., 1 Jan 2005, In: International Biodeterioration and Biodegradation. 55, 1, p. 69-76
  Research output: Contribution to journal › Article › peer-review
• PublishedThe decay resistance of anhydride modified wood: A study of the mechanisms.
  Ormondroyd, G. A., Hill, C. A. & Ormondroyd, G., 6 Oct 2005.
  Research output: Contribution to conference › Paper

2004

• PublishedDimensional changes in Corsican pine (Pinus nigra Arnold) modified with acetic anhydride measured using a helium pycnometer
  Hill, C. A. & Ormondroyd, G. A., 1 Aug 2004, In: Holzforschung. 58, 4, p. 544-547
  Research output: Contribution to journal › Article › peer-review

2003

• PublishedA Protocol for the Sampling of Recycled Wood and the Resulting Chipboard for Contaminant Analysis.
  Ormondroyd, G. A., Fru, C., Irle, M., Maher, K. & Ormondroyd, G., 8 Oct 2003, p. T1-T4.
  Research output: Contribution to conference › Paper
• PublishedThe Measurement of Contaminants in Recycled Wood and Products made from Recycled Wood.
  Ormondroyd, G. A., Irle, M., Fru, C., Maher, K. & Ormondroyd, G., 8 Oct 2003, p. 208-218.
  Research output: Contribution to conference › Paper

2002

• PublishedA Sampling Protocol for the Determination of Contaminant Levels in Wood Raw Materials and Finished Board Products.
  Ormondroyd, G. A., Irle, M. & Ormondroyd, G., 9 Oct 2002, p. 154-158.
  Research output: Contribution to conference › Paper
• PublishedA simple method for quantifying the PF resin content of composite wood panels.
  Ormondroyd, G. A. & Grisby, W. J., 1 Aug 2002, In: Holz Als Roh-und Werkstoff. 60, 4, p. 313-315
  Research output: Contribution to journal › Article › peer-review

2023

• Timber 2023

  29 Nov 2023

  Activity: Participation in Academic conference (Member of programme committee)
• International Panel Products Symposium 2023

  Members of the Biocomposites Centre organised IPPS: the leading technical conference on wood based panels, including all aspects of panel production technology, feedstocks, resins and additives, market analysis and the use of wood based panels in furniture and construction applications.

  In October 2023 the International Panel Products Symposium (IPPS) returned to Llandudno for a successful two days.

  3 Oct 2023 – 4 Oct 2023

  Activity: Participation in Academic conference (Member of programme committee)

2022

• Timber 2022

  5 Jul 2022

  Activity: Participation in Academic conference (Chair)

2020

• Timber 2020

  9 Sep 2020 – 10 Sep 2020

  Activity: Participation in Academic conference (Chair)

2019

• International Panel Products Symposium 2019

  8 Oct 2019 – 9 Oct 2019

  Activity: Participation in Academic conference (Member of programme committee)
• Timber 2019

  3 Jul 2019 – 4 Jul 2019

  Activity: Participation in Academic conference (Chair)

2018

• Timber 2018

  26 Jun 2018 – 27 Jun 2018

  Activity: Participation in Academic conference (Chair)

2017

• International Panel Products Symposium 2017

  4 Oct 2017 – 5 Oct 2017

  Activity: Participation in Academic conference (Member of programme committee)
• Cost Action FP 1407 training school

  Trainig school for European PhD and early career resesearchers, looking at modified wood.

  3 May 2017 – 5 May 2017

  Activity: Participation in Academic workshop, seminar, course (Organiser)
• EPSRC (External organisation)

  Peer Reviewer for EPSRC

  2017 – 2018

  Activity: Membership of board (Member)
• Graham Ormondroyd about how wool improves indoor quality

  Resolve the problem of CO2 emissions by insulating houses but created the problem of sick building syndrome

  2017 →

  Links:

  • http://www.elisabethvandelden.com/041-graham-ormondroyd/
  Activity: Types of Public engagement and outreach - Media article or participation (Contributor)

2016

• International Panel Products Symposium Masterclass 2016

  Course on basics of wood science for international academic and industry participants

  13 Sep 2016 – 14 Sep 2016

  Activity: Participation in Academic workshop, seminar, course (Organiser)

2015

• International Panel Products Symposium 2015

  7 Oct 2015 – 8 Oct 2015

  Activity: Participation in Academic conference (Member of programme committee)
• Cost Action FP 1303 training school

  A training school for Phd students and early career researchers on mould fungi

  8 Jun 2015 – 10 Jun 2015

  Activity: Participation in Academic workshop, seminar, course (Organiser)
• Journal of Reinforced Plastics and Composites (Journal)

  2015 →

  Activity: Publication peer-review (Peer reviewer)
• Proceedings of the ICE - Construction Materials (Journal)

  2015 →

  Activity: Publication peer-review (Peer reviewer)
• Progress in Organic Coatings (Journal)

  2015 →

  Activity: Publication peer-review (Peer reviewer)

2014

• Advances in Research (Journal)

  Subject editor (Wood)

  2014 →

  Activity: Editorial activity (Editor)
• BioResources (Journal)

  2014 →

  Activity: Publication peer-review (Peer reviewer)
• International Biodeterioration and Biodegradation (Journal)

  2014 →

  Activity: Publication peer-review (Peer reviewer)
• International Wood Products Journal (Journal)

  2014 →

  Activity: Editorial activity (Editorial board member)
• Journal of Tropical Forestry Science (Journal)

  2014 →

  Activity: Publication peer-review (Peer reviewer)
• Visiting Senior Research Fellow

  2014 →

  Activity: Types of External academic engagement - Membership of external research organisation (Visitor)

2013

• Maderas Cienc Tecnol journal (Journal)

  2013 →

  Activity: Publication peer-review (Peer reviewer)

2012

• Journal of Materials Science (Journal)

  2012 →

  Activity: Publication peer-review (Peer reviewer)
• Steering Committee for PAS 600

  2012 – 2013

  Activity: Types of Business and Community - Membership of public/government advisory/policy group or panel (Member)

• The Centre for Efficient Timber Recovery and Recycling (CETReR)

  01/06/2024 – 16/06/2025 (Active)

• Skills & Innovation voucher scheme - Friction Technology - Maxi

  01/05/2024 – 31/10/2024 (Finished)

• Construction of Palm Oil-based Underwater Adhesives and Their Synergistically Strengthening Mechanisms of Hydrophobic Protection and In-situ Mineralization

  01/03/2023 – 31/03/2025 (Active)

• KESS II MRes with British Wool - BUK2E083

  01/10/2022 – 31/03/2024 (Finished)

• Assessment of MDFR technology for Particleboard

  01/09/2022 – 30/09/2024 (Finished)

• BONDIFI

  01/09/2022 – 16/08/2024 (Finished)

• SMART Application Building Capacity for Collaboration 2022/23

  01/07/2022 – 20/10/2023 (Finished)

• Re-use of a self-cleaning building material

  01/04/2022 – 01/08/2022 (Finished)

• 82368 NoFireWood

  01/02/2022 – 30/09/2023 (Finished)

• Development of a Welsh wool network and novel products

  01/11/2021 – 31/08/2023 (Finished)

• CELISE

  01/10/2021 – 31/12/2199 (Active)

• Literature review on the effects of timber type and quality on pellet manufacture and use

  01/07/2021 – 01/08/2022 (Finished)

• Transforming Foundation Industries Research and Innovation hub (TransFIRe)

  01/07/2021 – 30/09/2024 (Finished)

• HEFCW HEIR COVID extension to ECR bid (R80K09)

  01/04/2021 – 31/10/2021 (Finished)

• CeTrer - CAPITAL CALL ONLY

  01/11/2020 – 01/08/2022 (Finished)

• Understanding the social and environmental effects of timber selection for new products

  01/10/2020 – 30/09/2024 (Finished)

• Cambond - nanocellulose

  01/08/2020 – 01/08/2022 (Finished)

• KESS II Phd with Lignia Wood company Ltd BUK2E028

  01/03/2020 – 15/02/2024 (Finished)

• Development of Aerogel dispersions for use in natural fibre insulations

  01/01/2020 – 01/08/2022 (Finished)

• Proof of concept - insulation

  01/11/2019 – 31/08/2020 (Finished)

• Proof of concept - insulation

  01/11/2019 – 31/08/2020 (Finished)

• 82134 Smart Efficiency Energy Centre (SEEC)

  01/05/2019 – 31/10/2023 (Finished)

• sKTP Silver Lining Smart Partnership

  12/06/2018 – 01/08/2019 (Finished)

• KTP with Silverlining Limited

  01/06/2018 – 30/06/2021 (Finished)

• KTP with Fibre 7/Lignia Wood Co Ltd

  08/01/2018 – 30/04/2020 (Finished)

• Lasercure

  01/09/2017 – 01/08/2019 (Finished)

• Natural-Fibre-Reinforced Thermoplastics for Injection Moulding (NATIM)

  01/04/2017 – 01/08/2019 (Finished)

• KTP with Clifford Jones Timber

  14/11/2016 – 01/08/2019 (Finished)

• Pineapple waste in Uganda

  01/09/2016 – 31/01/2018 (Finished)

• Plants and Architecture

  01/12/2014 – 01/08/2019 (Finished)

• Safe & Energy Efficient wall panels & materials (ECO-SEE)

  01/09/2013 – 01/08/2022 (Finished)

• Enviromnetally benign rare metal extraction from waste

  01/12/2012 – 23/08/2013 (Finished)

• Heat treatment of wood for advanced applications

  01/11/2012 – 30/06/2015 (Finished)

• BoostEff-Boosting raw material & energy efficiency

  01/06/2010 – 31/08/2014 (Finished)

• Feasibility Study - Identifying Improvements to Durability of Welsh Timbers and Products (FSP)

  01/02/2010 – 28/02/2011 (Finished)

• Organic Recovery Research Facility (ORFF)

  01/12/2009 – 28/07/2011 (Finished)

Vice President of the Institute of Materials, Minerals and Mining 

Fellow of the Institute of Materials, Minerals and Mining 

Director of Sustainability for KESS2 and KESS East 

UK representative to CEN TC 154 Solid Timber European Standards Committee

External Examiner – TUDublin BSc Timber and Timber Products and Sustainable Construction

Reviewer for EPSRC